
Payson Foundation Pros
Concrete Lifting in Payson, UT
Concrete lifting in Payson: polyurethane foam injection raises sunken slabs through dime-sized holes. Faster and cheaper than tear-out. Free estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Payson and nearby communities.
Concrete lifting raises sunken slabs back to level using polyjacking, polyurethane foam injected through dime-sized drill holes, instead of tearing out and repouring the whole section. Payson Foundation Pros uses this method on sunken slab sections around homes where soil moisture swings, irrigation on valley-floor lots and runoff on foothill lots alike, have left voids under the concrete over time.
Most slabs don't need to be replaced, they need the void underneath filled so the slab has something to sit on again. Foam injection does that in a few hours instead of the days a full tear-out and repour takes, at a fraction of the cost.
What's included
What's Included with Concrete Lifting
Typically included: slab assessment, drilling access holes, foam injection to raise and level the slab, hole patching.
Optional: joint resealing, surface sealant application for added moisture protection.
Customer prep: clear the slab area of furniture, planters, or vehicles before the crew arrives.
Want a clearer scope?
Get a Free EstimateHow it works
How Our Concrete Lifting Process Works
Step 1Surface Assessment
Uneven or sunken concrete areas are identified and measured.
Step 2Drilling Access Holes
Small holes are drilled into the concrete to allow material injection.
Step 3Material Injection
Expanding foam is injected beneath the slab to raise it evenly.
Step 4Elevation Monitoring
Lift progress is measured to achieve the desired level.
Step 5Hole Patching
Access holes are filled and finished to match the surrounding surface.
Step 6Final Inspection
The lifted area is reviewed for levelness and stability.
Materials
Materials and Methods for Concrete Lifting
Payson's soil moisture swings between irrigation season and dry spells mean slab voids reopen if the fill material isn't stable, which is why foam over loose fill matters here.

Polyurethane Foam
Expands beneath slabs to lift and stabilize concrete surfaces without adding excess load to already-variable soil.

Injection Ports
Allow controlled placement of lifting material under the slab for even lift.

Patch Compound
Fills drilled access holes for a smooth finish.

Surface Sealant
Protects the repaired area from moisture and staining through winter freeze-thaw cycles.

Leveling Gauge
Used to measure and confirm slab elevation during lifting.

Bonding Agent
Improves adhesion between new patch material and existing concrete.
Questions on materials?
Get a Free EstimateTimeline
How Long Does a Concrete Lifting Take?
Most lifting jobs are done in a single visit, with the slab ready for light traffic the same day.
- 01
Free estimate
same dayscheduling
- 02
Lifting and leveling
a few hours per slab section
- 03
Hole patching
same visit as lifting
- 04
Cure before foot traffic
same day
Need a schedule that fits?
Get a Free EstimateCost
What Does a Concrete Lifting Cost in Payson?
Cost depends on slab size, how deep the void underneath is, and how many access holes the job needs.
| Project type | Typical range | What’s included |
|---|---|---|
| Small slab section | $400–$900, | single panel lift such as a step or small walkway. |
| Driveway or patio panel | $800–$2,500, | per affected panel depending on size. |
| Multi-panel lift | $2,500–$6,000, | several connected panels lifted in one visit. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateNext step
Get a free estimate to see where your project lands.
Codes & permits
Permits and Codes for Concrete Lifting
Permit requirements vary by jurisdiction. Confirm with your city or county before scheduling.
| Typically needs a permit | Often no permit |
|---|---|
| Concrete work tied to a public sidewalk or right-of-way | Driveway slab lifting on private property |
| — | Patio or walkway lifting on private property |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs Hiring a Pro for Concrete Lifting
| DIY | Hire a pro |
|---|---|
| Filling small surface pits or minor cosmetic cracks with patch compound | Lifting a sunken slab back to level, which requires pressure-controlled foam equipment |
| Caulking expansion joints | Any slab with uneven settling across multiple panels |
| — | Slabs near structures where over-lifting could cause new damage |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to Call for Concrete Lifting
Call Payson Foundation Pros for a free estimate on getting your slab back to level.
- A slab section has visibly sunk compared to the rest
- Water pools on a slab that used to drain properly
- A trip-hazard lip has formed at a panel edge
- You're pricing tear-out and want a faster, cheaper option first
Seeing warning signs?
Get a Free EstimateFAQs
Concrete Lifting FAQs
How much does concrete lifting cost in Payson?
Most jobs run $400 to $6,000 depending on slab size and how many panels are affected.
Is polyurethane foam lifting permanent?
It holds as long as the underlying soil stays stable. Foam doesn't compress or wash out the way loose fill can, so it typically outlasts fill-based methods.
How long does concrete lifting take?
Most jobs finish in a few hours, with the slab usable the same day.
Is concrete lifting cheaper than replacing the slab?
Usually by a wide margin. Lifting addresses the void causing the sink without removing and repouring the concrete.
Can I lift concrete myself with a DIY kit?
Store-bought kits don't have the pressure control professional equipment uses, which means uneven lift or cracking is a real risk.
Does lifting work on any size slab?
From small walkway sections to full driveway panels. Larger or multi-panel jobs just take more injection points and time.
More services
Other Foundation Repair services

Foundation Repair
Foundation repair in Payson, UT: piering, crack injection and wall stabilization backed by free estimates and soil-matched methods.

Piering And Underpinning
Piering and underpinning in Payson, UT: steel push or helical piers driven to stable soil, free estimates on every job.

Wall Stabilization
Wall stabilization in Payson, UT for bowing or leaning basement walls, anchors and carbon fiber systems with free estimates.
Ask about Concrete Lifting
Tell us about the project and how to reach you.